Mezz 1 Parts Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just messed with the original model to make spaces in the club for tire weights, a cover plate, and a front face.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I printed in PETG and used a scrap piece of 6.25mm metal I had lying around the shop for the face. With every space filled with tire weights and the metal face it has a good weight and feels balanced with a spare shaft I took from an old club and a super stroke grip. Will be trying it on the course tomorrow morning.
Print Settings
I recommend PETG or a CF filament if you are able to print it.
50% infill or more
0.2 layer height
Textured PEI plate
Faceplate in PETG, Metal Plate, or TPU would even work for a bit of spring.
Faceplate 100% infill
Baseplate 100% infill
Supports for the main body only
Here are links to the weights and screws I used but you can use anything that works. I even used cut off pcs of rebar as weights in the early versions.
https://www.amazon.com/dp/B06XDHXRT7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
https://www.amazon.com/dp/B0DCZJG2GM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Have fun! and thanks to Printshed Designs for the base model use!
Update - added pic of the weights in the bottom
