DIN Mount Breaker Enclosure Single or Double
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Surface mount solution for your smart breaker, single and double version.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I had trouble finding a suitable basic single enclosure for surface mounting a smart breaker. I made this one to fit the common breakers on aliexpress. The DIN rail is a printed part of the base so no need to mess around cutting a din rail.
There are two covers, one for single switch and one for double switch.
There are two bases, one for self-tapping screws, and one for adding M3 brass inserts. (4.7mm)
There are extra punch-outs for different wire routes in the base.
I decided to use M3 sized screws for the lid so I can make the enclosure safer when at an accessible location, rather than just clip on - to keep little fingers out.
I printed in ABS, came out pretty decent. PETG it probably fine. There is quite a bit of ventilation.
.STEP File included - knock yourself out.