DIN Mount Breaker Enclosure Single or Double
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Surface mount solution for your smart breaker, single and double version.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I had trouble finding a suitable basic single enclosure for surface mounting a smart breaker. I made this one to fit the common breakers on aliexpress. The DIN rail is a printed part of the base so no need to mess around cutting a din rail.
There are two covers, one for single switch and one for double switch.
There are two bases, one for self-tapping screws, and one for adding M3 brass inserts. (4.7mm)
There are extra punch-outs for different wire routes in the base.
I decided to use M3 sized screws for the lid so I can make the enclosure safer when at an accessible location, rather than just clip on - to keep little fingers out.
I printed in ABS, came out pretty decent. PETG it probably fine. There is quite a bit of ventilation.
.STEP File included - knock yourself out.