OST-JACKAL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A less beta version of my jackal blaster now with a standard talon magwell option.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 521
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A top prime spring powered blaster with internal mag or talon mag magwell.
modular body
Same hardware as the beta version just updated parts and now with a Lynx grip from Orion blasters.
More information and build guide coming soon.
Step files included
Let me know if I left anything out!
OUTSIDETOY
Jackal hardware
4 inch k25 and k26 springs will work.
Aswell as upgrade retaliator/spamf springs
X2-m3 30 screws
X2-m3 25 screws
X4-m3 16 screws
X6-m3 10 screws
X2-2.5 x 30 pins for trigger and catch
Talon mag spring. For the internal mag. I’ve found that you won’t need to cut the mag spring with the big mag base.
Small spring for mag release.
1.5 - 4 inch polycarbonate plunger tube
X2-dash 123 O-rings
10mm x 2mm O-ring for pusher tip
18mm x 2mm O-ring for the barrel vice.
X4 - m3 8 screws
X3 - m3 12 screws
X2 - m3 35 screws
Small size spring for the catch.
13mm ID x 16mm OD aluminum barrel 6 inches or longer.
Let me know if it seems any hardware is missing.
Updates:
7-20-26 - I’ve updated the barrel vice as it was too shallow to hold an oring.
8-28-26 - I’ve added a drum spring version of the internal mag. The base and follower will need to go with it.
9-7-26 I’ve added 2 new back ends that allow bigger springs. I’ve had good results using k25 and k26 springs.
10-18-26 I’ve added the new low profile internal mag files. It uses a drum spring and looks a lot nicer.