BCN3D+ HD (high Z precision axis)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this update your Z axis will be more precise and you will avoid common problems such as Z waving. You will need:…
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
With this update your Z axis will be more precise and you will avoid common problems such as Z waving.
You will need:
- 2 x SWZ-063009 precision nuts (I bought them here)
- 2 x threaded rod 8x1.5mm (lenght 360mm) (I bought them here)
You will also need to modify your firmware, it's a simple line in Configuration.h but it's important because the new rods have a different pitch than the original ones. So, go to Configuration.h, comment the first as follows:
//#define DEFAULT_AXIS_STEPS_PER_UNIT {80.19,80.43,2560,458.3} // BCN3D+ default
And add the new line:
#define DEFAULT_AXIS_STEPS_PER_UNIT {80.19,80.43,2117.048,458.3} // BCN3D+ HD (precision Z rods from IGUS with 1.5 thread pitch). Theoretically it should be 2560/1.5 but 2117.048 was fine calibrated and outputs better results, I recommend recalibrate it for your specific printer
Print Settings
Printer:
BCN3D+
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Notes:
You can also print them at 0.2mm but original BCN3D+ printer parts are done at this resolution.
Category: 3D Printer Parts