BCN3D+ HD (high Z precision axis)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this update your Z axis will be more precise and you will avoid common problems such as Z waving. You will need:…
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 1
- Views
- 196
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
With this update your Z axis will be more precise and you will avoid common problems such as Z waving.
You will need:
- 2 x SWZ-063009 precision nuts (I bought them here)
- 2 x threaded rod 8x1.5mm (lenght 360mm) (I bought them here)
You will also need to modify your firmware, it's a simple line in Configuration.h but it's important because the new rods have a different pitch than the original ones. So, go to Configuration.h, comment the first as follows:
//#define DEFAULT_AXIS_STEPS_PER_UNIT {80.19,80.43,2560,458.3} // BCN3D+ default
And add the new line:
#define DEFAULT_AXIS_STEPS_PER_UNIT {80.19,80.43,2117.048,458.3} // BCN3D+ HD (precision Z rods from IGUS with 1.5 thread pitch). Theoretically it should be 2560/1.5 but 2117.048 was fine calibrated and outputs better results, I recommend recalibrate it for your specific printer
Print Settings
Printer:
BCN3D+
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Notes:
You can also print them at 0.2mm but original BCN3D+ printer parts are done at this resolution.
Category: 3D Printer Parts