1 / 6
Replacement Lid Seal for Vintage 1996 Le Creuset Seal & Store — zdjęcie 1
1 / 6

Replacement Lid Seal for Vintage 1996 Le Creuset Seal & Store

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement lid designed specifically for the vintage 1996 Retro Le Creuset "Seal & Store" container

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Open Community License v1.1 + General Attribution v1

This is a replacement lid designed specifically for the vintage 1996 Retro Le Creuset "Seal & Store" container. If your original lid has cracked, warped, or gone missing over the years, this model will make your classic kitchenware functional again.

Print Settings & Recommendations:

  • Material: TPU is highly recommended. You need the flexibility and rubbery texture of TPU to ensure it snaps on properly and creates a good seal.

  • Tolerances & Fit: Because different printers and TPU brands have varying shrinkage and extrusion behaviors, you may need to play with the scale percentage in your slicer.

  • Adjustment Tip: If the lid is too loose or too tight, adjust the X and Y scale slightly (e.g., between 99.5% and 101.5%) to fine-tune the tolerance and guarantee a secure, airtight closure.

Enjoy bringing your vintage Le Creuset back to life! If you print it, please share your makes and mention what scaling percentage worked best for your setup.

Tagi