Replacement Lid Seal for Vintage 1996 Le Creuset Seal & Store
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement lid designed specifically for the vintage 1996 Retro Le Creuset "Seal & Store" container
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Open Community License v1.1 + General Attribution v1
This is a replacement lid designed specifically for the vintage 1996 Retro Le Creuset "Seal & Store" container. If your original lid has cracked, warped, or gone missing over the years, this model will make your classic kitchenware functional again.
Print Settings & Recommendations:
Material: TPU is highly recommended. You need the flexibility and rubbery texture of TPU to ensure it snaps on properly and creates a good seal.
Tolerances & Fit: Because different printers and TPU brands have varying shrinkage and extrusion behaviors, you may need to play with the scale percentage in your slicer.
Adjustment Tip: If the lid is too loose or too tight, adjust the X and Y scale slightly (e.g., between 99.5% and 101.5%) to fine-tune the tolerance and guarantee a secure, airtight closure.
Enjoy bringing your vintage Le Creuset back to life! If you print it, please share your makes and mention what scaling percentage worked best for your setup.
