INFINITY ADAPTER (10-FRAME HONEY SUPER)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows different types of honey supers to be used with the P-HIVE INFINITY system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
INFINITY ADAPTER (10-FRAME HONEY SUPER)
This accessory allows the use of honey supers other than the proprietary 8-frame honey super. It enables compatibility with third-party honey supers, allowing users to reuse existing equipment and experiment with alternative configurations and solutions.
MANUFACTURING
The adapter requires two side elements (M1) and two front elements (M2). We recommend manufacturing these components in PETG, ASA, or wood.
ASSEMBLY
During assembly, apply a layer of adhesive to the mating joints (highlighted by the red outline in ASSEMBLY 1).
and assemble the components as shown in ASSEMBLY 2.
Secure the assembly with a clamp until the adhesive has fully cured.
Finally, verify that the adapter fits securely and precisely onto the edge of the Infinity hive.
FIND OUT MORE ABOUT OUR HIVES: https://p-hive.com/