Split Kyber Crystals for use with RFID chips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split versions to support a 2x12mm RFID chip.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted more Kyber crystals to use with a holocron and was too cheap to buy all versions.
These are split to be printed in two halves and insert a 2x12mm RFID chip. The two outer holes are for small 1.75mm filament plugs to help with alignment. Test fit before gluing and trim the filament so the parts sit flush.
I printed with transparent PETG at 100% infill and colors the exterior with alcohol inks. I used a smooth PEI sheet to ensure there would be a close fit.
See Ruthsarian's YouTube channel on how to program these, I used a Proxmark 3 Easy.
Also see this Tutorial on how to update these particular chips so they work with the holocrons.