Split Kyber Crystals for use with RFID chips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Split versions to support a 2x12mm RFID chip.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted more Kyber crystals to use with a holocron and was too cheap to buy all versions.
These are split to be printed in two halves and insert a 2x12mm RFID chip. The two outer holes are for small 1.75mm filament plugs to help with alignment. Test fit before gluing and trim the filament so the parts sit flush.
I printed with transparent PETG at 100% infill and colors the exterior with alcohol inks. I used a smooth PEI sheet to ensure there would be a close fit.
See Ruthsarian's YouTube channel on how to program these, I used a Proxmark 3 Easy.
Also see this Tutorial on how to update these particular chips so they work with the holocrons.