1 / 4
8-Fach-Silikatkäfig Filamenttrockner V3 - 8-stage silica container filament dryer — zdjęcie 1
1 / 4

8-Fach-Silikatkäfig Filamenttrockner V3 - 8-stage silica container filament dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

8-Fach-Rondell zur Silikattrocknung im Filamenttrockner - 8-stage rotary drum for drying silicate in a filament dryer

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Einige Printables haben mich dazu bewogen, eine Halterung für Silikat-Tockenbehälterzylinder in Spuelenform zu konstruieren, die in einen Filamenttrockner passt.

Die Breite beträgt 80 mm. -> Achtung: Das Rondell passt nicht in Standard-Filamenttrockner!!

Die Zylinder dürfen einen Durchmesser von 55 mm haben. Kleinere Käfige werden ebenso in Position gehalten.

Die beiden Hälften aus PETG oder besser sollten geklebt werden. 

Um bei Wärme (bis 80°C) die Formstabilität zu gewährleisten, sollte mit 1 mm Wandstärke gedruckt werden.

Ausführung V3 (D=200 mm) mit Rippen und richtungsunabhängiger Zusammenbau.

Infill wird nur für die beiden Seitenflächen und den Schaft benötigt.

Some printables inspired me to design a holder for silicate drying cylinder containers in the shape of a spool that fits inside a filament dryer.

The width is 80 mm. -> Caution: The disc does not fit in standard filament dryers!!

Version V3 (D=200 mm) with ribs and orientation-independent assembly.

The cylinders can have a diameter of 55 mm. Smaller cages are also held in place.

The two halves, made of PETG or a better material, should be glued together.

To ensure dimensional stability at high temperatures (up to 80°C), print with a wall thickness of 1 mm.

Infill is only needed for the two side panels and the shaft.

Tagi