8-Fach-Silikatkäfig Filamenttrockner V3 - 8-stage silica container filament dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
8-Fach-Rondell zur Silikattrocknung im Filamenttrockner - 8-stage rotary drum for drying silicate in a filament dryer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Einige Printables haben mich dazu bewogen, eine Halterung für Silikat-Tockenbehälterzylinder in Spuelenform zu konstruieren, die in einen Filamenttrockner passt.
Die Breite beträgt 80 mm. -> Achtung: Das Rondell passt nicht in Standard-Filamenttrockner!!
Die Zylinder dürfen einen Durchmesser von 55 mm haben. Kleinere Käfige werden ebenso in Position gehalten.
Die beiden Hälften aus PETG oder besser sollten geklebt werden.
Um bei Wärme (bis 80°C) die Formstabilität zu gewährleisten, sollte mit 1 mm Wandstärke gedruckt werden.
Ausführung V3 (D=200 mm) mit Rippen und richtungsunabhängiger Zusammenbau.
Infill wird nur für die beiden Seitenflächen und den Schaft benötigt.
Some printables inspired me to design a holder for silicate drying cylinder containers in the shape of a spool that fits inside a filament dryer.
The width is 80 mm. -> Caution: The disc does not fit in standard filament dryers!!
Version V3 (D=200 mm) with ribs and orientation-independent assembly.
The cylinders can have a diameter of 55 mm. Smaller cages are also held in place.
The two halves, made of PETG or a better material, should be glued together.
To ensure dimensional stability at high temperatures (up to 80°C), print with a wall thickness of 1 mm.
Infill is only needed for the two side panels and the shaft.