Dust cap for Celestron C6 with Hyperstar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect the front of a C6 without removing the Hyperstar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
This is intended to be printed "nose down" to get the rim to print cleanly. No supports. PETG recommended.
My physical prints measured a millimeter or two smaller than the digital model was specifying. I assume this was due to material shrinkage and to compensate I had to make the diameter of the model larger than what it nominally should be. What I have uploaded here is what fits perfectly for me, but the shrinkage probably varies from one brand of filament to another. I would suggest printing the rim by itself as a fit test and scale the model in X/Y until you achieve the desired fit before printing the whole thing.