Arco silenced toolhead v8 (with and without Beacon RevH)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Arco toolhead is made to add a Noctua A4x20 for better cooling while being less noisy. Beacon RevH capable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to silence the head fan while having a better cooling, add better part cooling and a Beacon RevH.
This is the result. I recommand printing it in ASA but I guess ABS would do. There is a probably a good lot of tree support going to be made so you should use a plastic where taking those support will be easy. I reused the original fans and screws, if you don't have small brass inserts for the top noctua fan, you can put a hex knob under instead. Magnets are standard round 2.6x6mm, just be careful with polarity against front / back box and the central carriage.