Arco silenced toolhead v8 (with and without Beacon RevH)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Arco toolhead is made to add a Noctua A4x20 for better cooling while being less noisy. Beacon RevH capable.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to silence the head fan while having a better cooling, add better part cooling and a Beacon RevH.
This is the result. I recommand printing it in ASA but I guess ABS would do. There is a probably a good lot of tree support going to be made so you should use a plastic where taking those support will be easy. I reused the original fans and screws, if you don't have small brass inserts for the top noctua fan, you can put a hex knob under instead. Magnets are standard round 2.6x6mm, just be careful with polarity against front / back box and the central carriage.