1 / 3
AD5X Enclosure mod IFS. Protect for PTFE tube. PLA TPU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flashforge AD5X IFS/PTFE protect
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 96
- Wydruki
- 2
- Wyświetlenia
- 358
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (29)Powiązane
Easy installation without removing the tubes.
For reliability, it consists of two parts connected by 2xM6 nuts.
Both parts are optimized for TPU 95A printing
An M6 nut is used for the connection from here
Print Instructions
PLA outer and inner part
walls: 3 or more
infill: 20% or more
TPU 95A outer and inner part
seam position: Random
walls: 3 or more
infill: 50% or more
The photo shows the installation procedure. The parts are made of TPU 95A and the nuts are made of PLA