Panasonic JU-455 Floppy Drive Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Lever for a Panasonic JU-455
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
A replacement lever for a Panasonic JU-455.
The drive I bought lacked the lever which makes it rather difficult to use. This is a part created entirely without the original part, only referencing the metal rod on the drive and photos, so don't expect this to be a 1:1 match.
You can of course print this in any colour, I only printed it in white as that's what I had loaded in my printer at the time. Printed on my Prusa MK4S.
I recommend you print with 3 (or more) walls and 40% infill. It does need to be a strong part. ABS may not be the best choice due to shrinkage, and PLA may be too brittle. PETG was my choice and it worked great.
Please note: this is a friciton-fit part, so your printer's tolerances need to be dialled in well. I've included the original F3D file as well as a STEP file in-case you'd like to modify the opening to work better with your printer / floppy drive.