Heel Guard Anti-Scuff Covers for Honda
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
on the Honda CB125R look great, but they have one drawback
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Commercial Use - No Derivative
Heel Guard Anti-Scuff Covers for Honda CB125R
Description
The Honda CB125R's aluminum heel guards look great, but they have one downside — the raw aluminum rubs off onto your shoes, and those stains are practically impossible to clean off. These covers solve that: they fit onto the original aluminum heel guards and form a barrier between the metal and your boot, so your shoe no longer makes direct contact with the aluminum and stops getting blackened.
The honeycomb pattern isn't just for looks — it also gives good grip for your boot and keeps the part light without sacrificing stiffness.
The cover is friction-fit — no screws or glue needed.
Fitment
Honda CB125R (verified on a 2021–2022 model, should also fit other model years with the same heel guard — if unsure, compare the shape of your original guard against the photos).
Set includes: 1x left + 1x right
Print Settings
Material: ASA (recommended for UV and abrasion resistance — this part is exposed to weather and constant contact with your boot)
Layer height: 0.2 mm
Perimeters/walls: min. 4 (for stiffness of the honeycomb pattern)
Top/bottom layers: zero
Infill: 15% honeycomb
Supports: none needed (flat model)
Brim: recommended, for better bed adhesion when printing ASA
Print orientation: flat on the bed
Installation
Clean the original aluminum heel guard.
Press the cover onto the guard (if needed, trim it with a knife so it fits).
Notes
Purely cosmetic/protective part — not a structural or safety component.
The cover can be removed, cleaned, or reprinted anytime — unlike aluminum, the plastic won't leave permanent stains on your shoe.
Printed on a Prusa Core One.