Skadis Desk Clamp made for Bror trolley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis desk clamp remixed for the IKEA BROR trolley
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of Skadis Desk Clamp (Universal Clamp with Snap Fit), modified to fit the thicker top of the IKEA BROR trolley.
Changes from the original:
Clamp throat deepened by 5mm: the distance between the back wall and the screw hole went from 11.4mm to 16.4mm, so the BROR top edge (~14.5mm) seats fully with clearance to spare.
Screw shaft extended by 49.5mm (40mm → 89.5mm) to provide enough clamping travel for the deeper throat. Thread profile and 1.5mm pitch are unchanged, so it's fully compatible with the original threaded hole.
Skadis slot, hook geometry, and thread dimensions are untouched from the original design.
Print notes:
Clamp: 5-6 perimeters, 40%+ infill recommended since the jaw arm carries a bending load.
Screw: prints fine vertically, threads need no supports.