Outdoor Sensirion Sen6x + ESP32-C3 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An outdoor case for the Sensirion Sen6x series, like the Sen65 or Sen66, with an ESP32-C3 Mini
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An outdoor (hopefully) weatherproof case for the Sen6x series with ESP32-C3 Mini. Tested with Sen65, but should work with Sen66, Sen69, etc. Given it's for outdoor usage, co2 isn't as necessary.
There's an inner box, with the sen6x facing forward, and an outer-box with channels/"fins" that divide the inlet and exhaust ports of the sen6x. These channels prevent re-circulation, and the bottom grill attaches directly over them, forcing air in/out through the louvers.
I used 2-56 screws I had on hand but may work with other sizes as well, easy to modify if need be.
I suggest using a Silicone or PVC-style USB cable (non-braided), as it is meant to routed through & clamped by the inner case. The cable will run down the interior side-channel and through the notch in the bottom grill.