Modular "Print-in-Place" Snapback Hanger – Space Saver

Tired of deformed caps cluttering your shelves or taking up too much room? Meet the Modular Snapback Hanger, a print-in-place, zero-support vertical organizer designed to keep your baseball caps, hangers, and accessories perfectly organized while saving precious wardrobe space.

⚙ How it works:

1. Print-in-Place: The model prints completely flat on your build plate with no supports needed.

2. Twist & Lock: Once printed, simply rotate the inner tab by roughly 40 degrees until it clicks into place, creating a sturdy hook for your cap’s snapback strap, a hanger, or other accessories.

3. Go Modular: The bottom hook of one module perfectly links into the top loop of the next. Chain as many as you need to build your ultimate vertical cap cascade!

📐 Dimensions & Print Stats:

• Size: The main body measures 60x35x4 mm (excluding the protruding hooks used to link into the loops of adjacent modules).

• Print Time: Less than 30 minutes to print a single complete piece (body, large hook, and small hook).

• Filament Usage: Approximately 7 grams per module. An incredibly fast print and a perfect way to use up your leftover filament scraps!

🛠 Design Features & Printing Settings:

• No Supports Required: Optimized bridges and built-in clearances mean you can print it flat and pop it off the bed ready to go.

• Versatile: Can be hung directly on the main closet rod, over a standard clothes hanger, or linked in sequence.

• Material: Works great in standard PLA or PETG (choose PETG if your closet gets very warm or if you plan to hang heavier items).

• Infill: 10-20% Gyroid or Grid is more than enough for cap storage.

• Perimeters: I highly suggest using 3 walls/perimeters to ensure maximum strength on the mechanical hinge and hooks.