M8 T-nut for 4080 aluminium extrusion (drop in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M8 T-nut. originally made to attach accessories to my sim racing rig.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
You can drop this t-nut slot in, you don't have to insert it from the start of the extrusion.
I originally made it to attach an accessory I made for my sim racing rig, which is made of 4080 aluminium extrusion. I had a lot of the M8 bolts left from when I got the racing rig, but no bolts, and I also didn't want to remove things in order to insert the t-nut in. So I made this threaded t-nut to use, which you can just drop in from the top, you don't have to insert it from the start of the extruded piece.
It is pretty much one time use because the threads are fine and it is a tight fit, but they will hold what you put on it (at least it does for me).
Hope this helps.