Mount for misting system nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for hanging misting system nozzles. Connector clicks into the mount, nozzle (or extension) is screwed into bottom.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
We use a misting system to help cool down our veranda. The system uses PA tubing with metal connectors. Misting nozzles (or extenders) are screwed into the connectors.
I designed a nozzle mount that can hang on an aluminium profile (1.5-2mm thick) in the veranda. The metal connector clicks into the mount; the misting nozzle (or extender) is screwed into the connector via the hole in the bottom of the mount.
Use Tesa double-sided tape (suitable for outdoor, high temperature range) on the back of the mount; this way, the mount stays put and you don't need mounting screws.
Printed in Prusament PETG; back of the mount was lightly sanded to provide better adhesion for the double-sided tape.
As shown in the pictures, mount can be printed in multiple orientations; supports are needed ("organic" supports recommended).