Mount for misting system nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for hanging misting system nozzles. Connector clicks into the mount, nozzle (or extension) is screwed into bottom.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
We use a misting system to help cool down our veranda. The system uses PA tubing with metal connectors. Misting nozzles (or extenders) are screwed into the connectors.
I designed a nozzle mount that can hang on an aluminium profile (1.5-2mm thick) in the veranda. The metal connector clicks into the mount; the misting nozzle (or extender) is screwed into the connector via the hole in the bottom of the mount.
Use Tesa double-sided tape (suitable for outdoor, high temperature range) on the back of the mount; this way, the mount stays put and you don't need mounting screws.
Printed in Prusament PETG; back of the mount was lightly sanded to provide better adhesion for the double-sided tape.
As shown in the pictures, mount can be printed in multiple orientations; supports are needed ("organic" supports recommended).