IKEA MITTLED, strong mounting clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A durable version of the clip for IKEA MITTLED lights. Very snug fit and strong grip for many years of trouble-free use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few days ago, my wife broke the mounts for the LED lights above our kitchen countertop—the IKEA MITTLED model. I found some 3D models here that replicate the original very well, but in my opinion, they aren’t really suitable for FDM printing—no offense to the authors, of course. So I fired up my trusty Onshape and created my own, much more robust version. 😎
WARNING! I designed the mounting clips to have a REALLY tight fit. So, to install them successfully, you'll need a well-calibrated printer and a little bit of force.
If you have trouble fitting them, scale the model down by 1–2% before printing (but only along the X/Y axes; the Z axis must remain unchanged), and everything should be just fine.
Recommended settings
Material: PET-G (for very good layer adhesion and decent durability)
Layer height: 0.2 (I used 0.16 starting at a height of 0.4)
Perimeters: 4-5
Infill: 40-60%
Infill Type: Gyroid or a similarly durable type
Supports: Yes