Candle Dust Cover - Diptyque 190g
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snug-fit cap that protects a Diptyque 190g candle from dust when not in use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a simple protective cap designed to keep dust out of a Diptyque 190g candle between uses. It's a two-part shape in one print: a flat cap that rests on top of the candle's rim, with a small plug underneath that inserts into the opening to keep the cover centered and in place.
Fit
Designed for the standard Diptyque 190g jar (77.5mm outer rim diameter, 3mm rim wall). The plug is sized with a 0.3mm diametral clearance for a snug but removable fit on a well-calibrated printer. If your rim diameter differs slightly, scale the model or adjust the plug diameter accordingly, the fit is tight enough that small tolerance shifts matter more than for most prints.
Print settings
Layer height: 0.2mm
Infill: 15-20%
Supports: none needed
Orientation: print flat, cap facing down (as designed)
No specific material requirement - PLA is fine for this indoor, low-stress application
Notes
The plug has a 1mm chamfer on its lower edge to ease insertion. If the fit feels too tight, a light sand of the plug's outer edge will loosen it without needing a reprint.