Ultrasonic Wash Tray - Case Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case rack for washing brass before reloading. Modular for your needs.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A modular ultrasonic wash rack for 9mm and .45 ACP pistol brass casings. It keeps the cases upright so that there are no air pockets. It is recommended that you decap the brass before washing it.
Print Settings:
I recommend PCTG Filament or PETG.
5 Walls
0 Bottom and Top Layers
Go slow and it should print with no supports.
Experiment with infill percentages and patterns for the best lattice. I also included a drip tray to place the rack once you take it out. Cases can be rinsed and left to dry in the rack. It can be used in either orientation, but face down is easiest.