Ultrasonic Wash Tray - Case Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case rack for washing brass before reloading. Modular for your needs.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
A modular ultrasonic wash rack for 9mm and .45 ACP pistol brass casings. It keeps the cases upright so that there are no air pockets. It is recommended that you decap the brass before washing it.
Print Settings:
I recommend PCTG Filament or PETG.
5 Walls
0 Bottom and Top Layers
Go slow and it should print with no supports.
Experiment with infill percentages and patterns for the best lattice. I also included a drip tray to place the rack once you take it out. Cases can be rinsed and left to dry in the rack. It can be used in either orientation, but face down is easiest.