Mason’s Line Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tensioner for mason’s line
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple tensioner for mason’s line that makes it easy to stretch the string and keep it properly tensioned during bricklaying, marking straight lines, or other construction work.
The model allows the line to be tightened quickly without complicated knots. After use, it can be released easily and reused.
Applications
bricklaying
marking straight reference lines
paving work
gardening and assembly work
tensioning thin utility cord
Printing
The model should print without supports. For better durability, PETG, ASA, or ABS is recommended. PLA should also be suitable for lighter use.
Recommended settings:
layer height: 0.2 mm
perimeters: 4
infill: 30–50%
supports: no
orientation: print with the largest flat surface on the build plate
Before use, make sure the line is properly secured and cannot slip out while tensioning.