ABKN-DIY PD45W 3S DIY powerbank faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a faceplate for the powerbank motherboard bought from AliExpress.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is just a faceplate for the powerbank motherboard bought from AliExpress. I also included the complete powerbank I made but since cell size differs a lot, it probably won't be of any use.
Before using it in your project, print just the test plate to see if it fits for your needs. I did foresee some margin in the holes for shrinkage but better to test it before than find out later you need to reprint the shell. I printed these with both ASA and PLA on a U1.
When designing your powerbank, make sure to leave some ventilation space on the back so hot air does not sit trapped.