1 / 3
ABKN-DIY PD45W 3S DIY powerbank faceplate — image 1
1 / 3

ABKN-DIY PD45W 3S DIY powerbank faceplate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is just a faceplate for the powerbank motherboard bought from AliExpress.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
110
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This is just a faceplate for the powerbank motherboard bought from AliExpress. I also included the complete powerbank I made but since cell size differs a lot, it probably won't be of any use.

Before using it in your project, print just the test plate to see if it fits for your needs. I did foresee some margin in the holes for shrinkage but better to test it before than find out later you need to reprint the shell. I printed these with both ASA and PLA on a U1. 

When designing your powerbank, make sure to leave some ventilation space on the back so hot air does not sit trapped. 

Tags