Century Graphic Lens Board - COPAL Press No. 1 (2x3 Baby Graflex)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a Copal Press No.1 Shutter to a 2x3 Crown Graphic, Century Graphic Camera
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A 3D-printable lens board for mounting a Copal Press No. 1 Shutter on a Baby Graphic / 2¼ × 3¼ Graphic camera.
Because the Copal Press No.1 is unusually large for a Baby Graphic, the lens board locking mechanism interferes with the shutter's aperture control, so you'll need to mount the shutter sideways.
Application Notes:
- Tested with PLA and PETG
- Print camera side up.
- 0.20mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm. That might limit the focal lengths you can actually use on this camera.