1 / 3
Century Graphic Lens Board - COPAL Press No. 1  (2x3 Baby Graflex) — image 1
1 / 3

Century Graphic Lens Board - COPAL Press No. 1 (2x3 Baby Graflex)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount a Copal Press No.1 Shutter to a 2x3 Crown Graphic, Century Graphic Camera

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A 3D-printable lens board for mounting a Copal Press No. 1 Shutter  on a Baby Graphic / 2¼ × 3¼ Graphic camera.

Because the Copal Press No.1 is unusually large for a Baby Graphic, the lens board locking mechanism interferes with the shutter's aperture control, so you'll need to mount the shutter sideways.

Application Notes:
- Tested with PLA and PETG
- Print camera side up. 
- 0.20mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm.  That might limit the focal lengths you can actually use on this camera. 


Tags