Counting matching models…
A guide to help with grip placement on an ESB/TFA Graflex. I modeled this based on measurements of my own TGS Gen2 Graflex Replica, measurements are shown in the attached PDF. Print instructions 2 shells 0.3mm layers 5-10% infill
Base plate and blade clip to vertically support a Graflex style lightsaber. I needed a display mount for my Graflex 2.0 Lightsaber to fit behind a cabinet door. I made it as shallow as possible at 2.458" deep. Cleat has enough tolerance…
This is a remix from a good fitting design a friend shared with me, which can be found on Thingiverse here: (Note, I would have marked this as a “remix” the PrusaPrinters way, but it wasn't working correctly, so this is my workaround)…
Update: The manufacturing methods used to make these cameras means that my design might not fit your camera, so I've added the STEP files that you can use as a starting point to tweak it until it fits. This is a 100% printable replacement…
Update230824 fix typo add some covers hotfix230817 update the lasercut file Add 3Dprinting version for lasercut panal fix some dimensions！！！！ BOM 位置 名称 数量 仙娜母卡口安装螺丝 M4x16盘头 5 铝板与机身之间 M3x50沉头 7 铝板与机身之间 90度倒角刀 1 铝板与机身之间 M3x8x4.2预埋螺母 7…
For the most recent updates, and STEP/f360 files use the GIT - we will update models there FIRST and on other platforms time permitting. the GIT also has instructions and eventually user mods - we HIGHLY recommend using the files on GIT…
This is a design for a simple adapter to convert the very portable 3 ¼ x 4 ¼ Graflex SLR cameras to be able to shoot with common graflok backs and attachments alongside cropped 4x5 sheet film. Additional Materials Needed: Adhesive flannel…
This is a custom made medieval themed Graflex lightsaber. I would suggest printing it at 225-250% scale to make it around the size of a normal Graflex lightsaber(in diameter). You might have to sand down the connections between the pieces…
Download and open the .scad in OpenSCAD to customize. You'll need the BOSL2 library. More info on the BOSL2 library here: https://github.com/revarbat/BOSL2 User editable parameters lensDiameter Outside diameter of lens barrel to be held…
Comes in two versions. The first version is a basic flat lens board with all parts of the board beefed up for added strength. You can add a custom sized lens hole and if necessary a thinner area for a retaining ring or a thicker area for…
Now that FP100C et al have gone the way of the dodo, Instax Wide is the instant film I've turned to. I have been shooting it in film holders and doing the dark bag shuffle for a few years. I started converting some Wide300 cameras to make…
This is a ground glass shim for 4x5 Graflex SLR cameras with a lomograflok back. To assemble this shim and adjust it to your specific camera, you will need four m3x16 screws, two m3x12 screws, and six m3 nuts in addition to the printed…
Pretty straight forward, I printed it with 3 walls for some strengths. It uses 4 flat head #4 x ¼ " screws. You can also just buy it here.
I have redesigned the lens board, to be more tough (thick). I've also added a small hole on the back side, some shutters do have this option (prevents rotation). Print nicely from PLA (0.2mm with outer brim also - can help), I can…
Lens board base for SLR Graflex cameras. Modify it to fit your lens!
I have created this for my photo project, the lens boards for small Graflex are not that common, especially with unusual holes. This one is with 26.6mm hole for Compur 00 shutter. Print nicely from PLA, I can reccommend also stronger…
This only exists because I bought a Graflex SLR sight unseen and I needed to test whether it works properly after servicing it without having to go through a roll of film. It's a bodge , and I'll probably spend some time coming up with a…
Graflex Lensboard for aero ektar 178mm f/2.5 Need 4x M4x10 screw recommend to use 6.6CNC in gy2025.com for lensboard and 3d printing for screw mount largeformat film
wanted to use the lens that was on my speed graphic on my intrepid 8x10 but also didn't want to take it off of the speed graphic board as I still use it there. So a few searches and some trial and error later we have this. I probably…
This is a lens board for Speed Graphic allowing mounting of a lens with a 1.66 inch diameter. It's slightly oversized to let the threads screw themselves into the plastic. My lens came without a flange. My lens is a Busch's Rapid…
The idea of the project was to bring an old camera back to live by converting an old 3x4 Graflex SLR camera into an easy to use INSTAX camera which can for Fuji INSTAX wide film. The adapter can be screwed/glued on the back of a Graflex…
This lens board is for Graflex SLR cameras that use “B” size lens boards. Uses an m3 nut and screw to clamp the lens to the board.
Sinar to Graflex Pacemaker 4x5 lensboard Adapter
Graflex to Linhof Lensboard adapter
Linhof to Graflex pacemaker 4x5 lensboard adapter
This is a grip i threw together for my spare graflex flash tube lightsaber.
Here is a simple insert that converts the Graflex 1234 adapter into a 4x5 wet plate holder. This fits 4"x5" glass or aluminum plates. Print Settings Supports: No Resolution: .15-.20 Infill: 30%
Anakin's Graflex (or Children Slayer 3000) This was my first ever 3D model. For any Star Wars fan! Hope someone likes it! Did this to learn my way through TinkerCAD and it was so much fun and challenging (for someone who has never tried…
This is made on request - for Alpax #3 shutter. I do not have this at home, so I cannot test, please let me know in comments if it works. Small hole on the back side, some shutters do have this option (prevents rotation). Print nicely…
This model is for the Graflex Film Pack 2 1/4 x 3 1/4 (6x9) holder. It allows to use a half 4x5 plate for wet collodion. The square part will fit perfectly inside, and is designed to put pressure into the plate. If you want to use a glass…
Print at 0.3 100% Infill
Graflex B board for the 21cm 3.5 Xenar
Graflex Pre-anniversery 4x5 lensboard
Linhof and Graflex lensboard conversion for pentax 67 165mm f2.8 cheap CNC lensboard https://gy2025.com/#/home/proofing
I've been getting asked questions about this lens cone on reddit and etsy by a few different people, which leads me to believe others would like to give this lens cone a try. I had the FFD marked down some place, but I've misplaced that…
Ever since the the Met showed Jacques-Henri Lartigue's private catalog of images in the 60's, people have been in awe of his 1913 image of a speeding car with distorted wheels and swept-back spectators. It's an effect of him panning the…
Print only the frame and hood with supports. The Magnet housing and side blinders should print without supports. Use standard 1.75mm filament as the hinges and melt the ends to seal them onto their respective parts. Uses two 9.5x1.5mm…
Graflex Pacemaker Speed Graphic to Sinar mount shutter conversion
This is a replacement darkslide for the Graflex 23 roll film back for 4x5 cameras. I recommend printing with matte black filament. After printing be sure your filament produces a lightproof dark slide. You can test this using a flashlight…
This requires 3x4mm+1x3mm banana plug, which shoud not come with any grip.
Print at 0.3 100% infill
Print at 0.3 100% infill
Replacement handle for a Grafmatic 45 Film holder Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.15 Infill: 25% Filament: eSun PLA Black Category: Camera
This is a set of Graflex Type C lens boards, carefully copied from the original wooden lens board that came on a 6 3/8" (162mm~163mm) f/4.7 Graphex lens and shutter in a 4x5" wartime Anniversary Speed Graphic. The boards themselves are…
1:1 copy of original GRAFLEX plate, 94mm x 93mm x 5mm, lens hole size is 65mm but i can adjust it if needed.
Adapter to attach a shoe mount accessory to the Speed Graphic's viewfinder mount. Mount a flash, trigger, light meter or any other cold shoe accessory to the Graflex body. Flash sync with the focal plane shutter will require an expensive…
This model adds a NATO rail to a 2x3 Centruy Graphic, using only existing strap lugs and one Socket Head 1/4-20 UNC x 3/4 bolt in the tripod socket. The tabs at the ends engages the factory strap lugs and 1/4"-20 bolt pins the rail in…
A 3D-printable lens board for mounting an Ilex No. 3 Shutter or Barrel on a Baby Graphic / 2¼ × 3¼ Graphic camera . Two versions are included: A board for the factory original four-hole Ilex mounting flange A board with the Ilex No. 3…
A 3D-printable lens board for mounting a Copal Press No. 1 Shutter on a Baby Graphic / 2¼ × 3¼ Graphic camera . Because the Copal Press No.1 is unusually large for a Baby Graphic, the lens board locking mechanism interferes with the…
A 3D-printable lens board for mounting a DIal Set Compur No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Graphic camera . Application Notes: - Tested with PLA and PETG - Print camera side up. - 0.20mm layer height. - Use scarf…
Adjust the FreeCAD project to match whatever lens you wish to mount
I made this mostly as an aid to measure actual focus distance for camera building, but I'm sure some adventurous soul would find some photographic application for this. I'm sharing in the hope that it might be useful. Thread Specs.:…
A 3D-printable lens board for mounting a Polaroid COPAL MP-4 Shutter on a Baby Graflex / 2¼ × 3¼ Century / Crown Graphic camera . The MP-4 shutter is a variant of COPAL PRESS that has no aperture. Originally it was part of the MP-4…
A 3D-printable lens board for mounting an Compur / Copal No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Yes. The Compur and Copal shares the same geometry and often interchangeable. Application Notes: -…
A 3D-printable lens board for mounting a Wollensak RAPAX / GRAPHEX No. 2 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Manufactured by Wollensak in Rochester, this is the same shutter that is commonly…
A 3D-printable lens board for mounting a Wollensak ALPHAX No. 1 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Application Notes: - Tested with PLA and PETG - Print camera side up. - 0.20mm layer height. -…
A replacement eyecup for karlart rangefinder, printed in TPU. I made this eyecup to replace a deteriorated rubber eyecup on a friend's Crown Graphic, should fit other cameras that uses the same rangefinder, such as Baby Graflex, Burke &…
This model is a stackable container to safety store and transport you lenses mounted on 4x5 Crown Graphic and Super Graphic Lens Boards. This design uses a widely available IKEA 365+ mix and match series, rectangular lid. IKEA Article…
A 3D-printable lens board for mounting an AGC Prontor / Pronto / Vario No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . AGC Prontor / Pronto / Vario No. 0 Shutters are frequently encountered on fixed lens…
This model is a stackable container to safety store and transport you lenses mounted on Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic Lens Boards. This design uses a widely available IKEA 365+ mix and match series, LARGE…
A 2x6 Gridfinitiy tray for organizing Century-Graphic / 2x3 Crown Graphic / Baby Graflex lens board. Secondary use is organizing enlarger lens with custom boards based on Century Graphic board dimensions. This will print on Core One sized…
Adapter to attach a shoe mount accessory to the Speed Graphic's viewfinder mount. Mount a flash, trigger, light meter or any other cold shoe accessory to the Graflex body. Flash sync with the focal plane shutter will require an expensive…
Linhof to Graflex pacemaker 4x5 lensboard adapter
Sinar to Graflex Pacemaker 4x5 lensboard Adapter
I have created this for my photo project, the lens boards for small Graflex are not that common, especially with unusual holes. This one is with 26.6mm hole for Compur 00 shutter. Print nicely from PLA, I can reccommend also stronger…
I have redesigned the lens board, to be more tough (thick). I've also added a small hole on the back side, some shutters do have this option (prevents rotation). Print nicely from PLA (0.2mm with outer brim also - can help), I can…
This is a very simple model I made for attaching modern flash bulbs to my 1950s' Graflex Century, it repurposes the crosshairs viewfinder rail to support the modern standard rail for flash bulbs and other camera attachments. Prints…
Graflex plate which allows you to mount 60mm lens with ISO thread 1mm without couter-ring.
My saber hilt was a bit slimmer than what this mount was designed for, I'm new to sabers, I believe this is technically a “stunt saber” (no control box) and the shelf was quite a bit wider than I needed. I designed this press fit mount to…
A 3D-printable lens board for mounting an Ilex No. 3 Shutter or Barrel on a Baby Graphic / 2¼ × 3¼ Graphic camera . Two versions are included: A board for the factory original four-hole Ilex mounting flange A board with the Ilex No. 3…
This was originally an insert I designed for a Aerolyte custom case I just happened to have on hand. Turns out it is quite useful on its own or remixed into other cavities, so I would like to share. It will fit most lens boards fitted…
This is a drilling template to mount a kobold d-ring to your Graflex lightsaber. It includes an optional soundhole. The bores are 3mm and will fit for a TFA-Style D-Ring. For an ESB style saber you can drill out the holes to fit 4mm…
This is a tool to screw the little Graflex Pins in or out of your bladeholder. I also added a second Version without the knurling. This should be easier to print. You have the choice. :) Print Settings Rafts: Doesn't Matter Supports:…
This lens board is designed to mount a Fujinon SWD 75mm f/5.6 lens on a Graflex Super Graphic. Other lens/camera combinations may work as well. The model has two parts, the board and the frame. Print the board first. Print the frame with…
