Wall Mount for Graflex Lightsaber - Low Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile vertical wall mount for Graflex lightsaber. 2.458" Deep
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 226
- Makes
- 2
- Views
- 817
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
Base plate and blade clip to vertically support a Graflex style lightsaber. I needed a display mount for my Graflex 2.0 Lightsaber to fit behind a cabinet door. I made it as shallow as possible at 2.458" deep. Cleat has enough tolerance for base holder to slide perfectly over it with little jiggle. Cleat mounts to wall with 2 tapered head screws and blade mounting clip with one cap head screw. Drywall screws would work perfectly in a pinch. The blade clip holds my 7/8" blade and allows it to be clipped in and out with little pressure. I cannot attest to a 1" blade working as well, but the diameter is large enough to hold one.
-Printed in PLA
-Blade C-clip printed sideways with support to give bending resilience. Print vertically at your own risk or cut the lower half of the rectangular plate to print without support
-I used supports for the cleat relief at on the base. A bridge will probably work if you don't want to use support
-My first model so the alignments of the crenellation is purely coincidental
Feel free to ask any questions. I will post the .obj or .stl if requested
Thanks!