Wall Mount for Graflex Lightsaber - Low Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile vertical wall mount for Graflex lightsaber. 2.458" Deep
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 226
- Wydruki
- 2
- Wyświetlenia
- 817
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Base plate and blade clip to vertically support a Graflex style lightsaber. I needed a display mount for my Graflex 2.0 Lightsaber to fit behind a cabinet door. I made it as shallow as possible at 2.458" deep. Cleat has enough tolerance for base holder to slide perfectly over it with little jiggle. Cleat mounts to wall with 2 tapered head screws and blade mounting clip with one cap head screw. Drywall screws would work perfectly in a pinch. The blade clip holds my 7/8" blade and allows it to be clipped in and out with little pressure. I cannot attest to a 1" blade working as well, but the diameter is large enough to hold one.
-Printed in PLA
-Blade C-clip printed sideways with support to give bending resilience. Print vertically at your own risk or cut the lower half of the rectangular plate to print without support
-I used supports for the cleat relief at on the base. A bridge will probably work if you don't want to use support
-My first model so the alignments of the crenellation is purely coincidental
Feel free to ask any questions. I will post the .obj or .stl if requested
Thanks!