1 / 4
Minimalist Mudguard for Orbea Terra & Other Gravel Bikes — zdjęcie 1
1 / 4

Minimalist Mudguard for Orbea Terra & Other Gravel Bikes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sleek, custom rear fender for the Orbea Terra (likely fits other gravel frames too). Designed for rigidity and impact

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

Keep the mud off your back without ruining the look of your bike.

I designed this custom rear mudguard specifically for the Orbea Terra, but it will very likely fit many other gravel and cyclocross bikes with a similar frame geometry. Gravel riding gets messy, but most universal fenders are bulky, rattle, or simply don't match the clean, aggressive lines of a modern bike.

This design focuses on minimalism and functionality. It features a sleek, aerodynamic profile with a central ridge that adds structural rigidity without adding unnecessary weight. The mounting ring provides a secure, flush fit, ensuring it stays firmly in place even on rough terrain.

Key Features:

  • Custom (Yet Versatile) Fit: Tailored proportions that perfectly complement the Orbea Terra frame, with a high probability of fitting other gravel bikes. (If you mount it on a different bike, let me know in the comments!)

  • Rigid & Silent: The central ridge prevents the fender from flopping or rattling during bumpy rides.

  • Lightweight Design: Minimalist approach that provides essential spray protection right where you need it.

Print Instructions & Recommendations (Please read!):

  • Material: For the best durability, I recommend materials with good layer adhesion and impact resistance (PETG, ASA, ABS, or TPU). My personal choice: I printed mine in a high-viz, neon orange Nylon. It gives an awesome pop of color, looks incredibly cool, and is virtually indestructible out on the trail!

  • Orientation & Supports (Crucial): Check the attached slicer screenshot for the optimal orientation. Place the mounting bracket flat on the build plate so the mudguard arcs upwards.

  • Supports: You will need Tree (Organic) Supports. As shown in the picture, you'll need one tall tree support to hold up the very tip of the fender, and some minor supports around the mounting base. This specific orientation guarantees the cleanest possible surface finish on the main visible body of the mudguard.

  • Layer Height: 0.2mm provides a perfect balance between a smooth finish and print speed.

  • Perimeters/Walls: 3-4 walls for maximum rigidity, especially around the mounting ring.

  • Infill: 15-25% (Gyroid or Cubic).

Ride hard, stay (mostly) clean, and happy printing! If you print one for your Terra or test it on another gravel bike, please share a make—I'd love to see what colors and materials you went with!

Tagi