Greenhouse Cover Strips - for Willb garden greenhouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various lengths of a slim cover strip to hide low voltage cables in the 6mm profile groove on Willb garden greenhouse.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is some various lengths of a slim cover strip to hide thin low voltage cables in the 6mm wide profile groove on Willb garden greenhouses that gives almost an "invisible" installation.
The covers are available from 50mm to 250mm in 50mm steps.
Recommended to be printed in vertical position to get the layer lines in the strongest direction for the snapping locks.
As lengths over about 100mm tends to starts wobbling in vertical position, all lengths are available in a group of four with support designed into the model that are very easy to snap off after the print.
This dimensions snaps in quite tight in my profiles, but it might be wise to make a test print of a 50mm cover and test the fitting in your situation and scale the X&Y a percent or two in the slicer if necessary.
As the covers are both long and thin they can snap off quite easy. Be careful then installing or removing, starting at one end and gently push it in.
Pictures showing just a demonstration of some covers mounted with a white cable, not the final installation.