Fishing cage feeder

Simple Cage feeder design for Fishing. Ideal for paste and pellet combinations. Ive tested with bread flake and that works well too.

You will need some aditional bits.

1 some lead strips to slot into the box at the back. Cut to size.

Some wire you can twist into your desired length to creat a loop at one end.(optional) you could use some mono line and a swivel.

2 part resin or 5 minute epoxy. 

Insert your choice wire or line into the box then carefully pour some epoxy or resin into the box about quarter full. 

Then inspert your strips of lead so they are coated and cant contaminate the water your fishing.

Then when position of your wire and line is where you want it fill the rest of the box void with resin/epoxy.

Leave somewhere outside or well ventalated to dry.

I chose to coat mine whole cage feeder inside and out with resin to add more protection.

They are only little so no fast rivers. They wont hold.

There is a semi circle tab on the top which has a tiny hole for anyone who has a minature drill bit to clear out and you can add your line fitting here if you chose.

I made it this way but have yet to do this mysslf as I am still trying to find my small drill bit selection :-) 

Printed in Gold PLA silk 20% infill.