| JUNSUN | EV charger holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder for a JUNSUN EV car charger with a holder for the cable on the back
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
| BASIC DESCRIPTION |
holder for the EV charger
basic idea is to implement the holder for the charger and the wires in the same model
| DESIGN DECISIONS |
easy to print - fits on a standard size bed for 3D printers
there are two design options - one is clean and the other is textured on the front
texture was made using a fantastic tool made by CNC kitchen - BumpMesh - I recommend you check it out, it is brilliant and free!
there are only two parts - easy to print and assemble
the holes for the screws have an indent for the screwhead to go in as not to scratch the charger on the back
| PRINT SETTINGS |
no supports are needed
I printed with 3 perimeters and 20% infill just to be safe - it came out sturdy
| ASSEMBLY |
there are only 2 parts - the holder and the backplate
the backplate is multi purpose - it straightens the holder and you also use it as a template for drilling holes
to fix the holder to the wall you use three 4 mm screws, minimal lenght of 50 mm
| UPDATE |
15.07.2026. - added version 2 with a slit on one side for quicker mounting and dismounting of the charger. On this version I would recommend some supports on that side just so it comes out cleaner