Newtonian 130/650 Primary Mirror Cooling Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Newtonian 130/650 Primary Mirror Cooling Fan Mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rear cooling fan mount for a Newtonian 130/650 telescope tube with no factory rear ventilation. Designed to fit a rear opening of approximately 105mm diameter. Holds an 80x80mm fan (tested with Arctic P8 Silent) behind the primary mirror, mounted on silicone anti-vibration dampers to keep fan vibration off the optics. Includes a dust mesh cover to keep debris out.
What you'll need:
4x M3x10 countersunk (flat head) bolts
4x heat-set inserts, 3x8x5mm
1x 80x80mm fan (e.g. Arctic P8 Silent)
1x 80x80mm dust mesh/filter
4x silicone anti-vibration fan mounts
