Single row pedalboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and easy to use alu extrusion based pedalboard. 20-Series extrusions required.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by Modboard Desktop Stand, I made simplest pedalboard.
No inserts, no nuts, all you need is 20-series extrusions with side threads and 4 screws M6 for assembly. Rubber pads and dual-lock strap is optional. I tried to make it useful but also easiest to print and assembly. And it is, and looks pretty cool.
I recommend to use 300mm length of extrusions and it fits 3-5 pedals depending of pedal and cable sizing.
Improved extrusions slots allows to use full length of your pedalboard +2x5mm of side walls. Angled surface for comfortably use switches also increasing bottom area for placing cables. Small ledges from backside provide safety for your cables when you place your board close to walls.
Hope it will be useful. Enjoy!