Spice and Rub Caddy for 50mm jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caddy for Spices and Rubs, 50mm diameter jars. Has a handle. Looks vaguely like a surprised frog.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a simple caddy to store my spices and rubs. This was modelled for jars that are 50mm in diameter,
My goal was to have a low friction tray that could act as a carousel, without being round, so I could use the space more efficiently. The large jars slide along the tracks so it is easy to rotate the selection while it is in the pantry. I also wanted it to be easy to handle if I needed to get it out. So it has a handle.
The handle is a bit of a bridge, but I printed it without supports and it came out OK. I recommend a higher bridge density, or high flow rate multiplier which can greatly improve the quality of the bridge.
Model is 417mm long. It will fit a 350mm bed.
Printed in PLA, .8mm nozzle.