Ikea Duktig play kitchen water dispenser mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount that adapts a common battery-powered water jug dispenser to the Ikea DUKTIG model children's play kitchen
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This project is inspired by the following blog: https://theorganizedmomlife.com/functional-toddler-kitchen/ Similar units can be found by searching "water pump dispenser" on Amazon or AliExpress.
Design elements were taken from Vindikkator and Nolan Chan's mounts, but allows use of the same hardware that comes with the product to fix it in place. Part geometry conforms to injection molded features to minimize sloppiness in the fit. No additional hardware is necessary and prints without supports.
It is suggested to print the screw & plug mounting point pieces with the test STL to verify fit of your prints both within the larger base and also on the kitchen to determine whether you'll need to use any XY or hole compensation. The holes on my kitchen may be drilled a few tenths of a millimeter different from yours and that may also lead to the need for compensation.
The "pin" plug guides down towards its hole in reverse, then spin it 180 degrees to seat completely. Take care not to overtighten the metal self-tapping screw or you may split this part. You may stop when the mount feels snug. The silicone tubing for the pump may be inserted through the central threaded piece.