1 / 7
Mounting the DJI Mic Mini 2 in an LS2 flip-up helmet.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting the DJI Mic Mini 2 to an LS2 flip-up helmet with cheek pad attachment.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
The mount is attached to the cheekpiece with Velcro. If necessary, I can quickly remove the mount. The DJI Mic Mini 2 can be attached using a clip or by inserting a DJI magnet into the mount. The magnet is easy to remove, see the animation.
3D printing settings
Material: PLA, ABS, ASA, PTEG
Layer height: 0,16 mm
Infil: 100%
Wall thickness: 1,2 mm
Support: NO