Canon P-208II Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Canon P-208II directly to your desk
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These simple mounting brackets allow you to mount your Canon imageFORMULA P-208II document scanner to your desk, preferably under it. You'll only need some woodscrews (e.g. 3.5x20).
As this is a very minimal design, opening the front flap works perfectly fine IF you have some means of pulling on it, e.g. with something taped/glued to the flap, or with some tool that allows you to hook into the notch at the top. Or you could just leave it open.
There's a "Left" and a "Right" bracket, which are basically identical, except that the "Right" Bracket is a bit wider than the "Left" bracket, as the flap is closer to the edge on the left side.