Embroidery/Mending hoop - Parametric+STL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Embroidery/Mending Hoop
A fully parametric embroidery hoop built in Fusion 360, with ready-to-print STLs included in three common sizes.
Need a different size? Leave a comment and I'll add it!
About the fit
A 0.5 mm clearance between the two rings works well for most fabrics and applications, and is what the included STL files use. If you're working with something unusually thick or thin, the F3D file lets you dial in your own clearance.
Ready-made sizes included
For convenience, this upload includes pre-generated STL files in three common sizes, all with a 0.5 mm clearance between the two rings:
50 x 70 mm
100 x 100 mm
150 x 100 mm
How it works
The hoop consists of two rings with a size difference between them, giving a snug press-fit that holds fabric in place, ideal for embroidery or mending clothes.
Why parametric instead of just the ready-made STLs?
The included STLs cover the three most common sizes, but embroidery hoops and fabric come in endless combinations. If your project needs a size that's not listed or a different clearance for a thicker or thinner fabric, the F3D file lets you punch in your own numbers and get a press-fit hoop that's guaranteed to update cleanly, no matter what values you enter.
Files included
STL - ready-to-print files in the sizes listed above
STEP - universal CAD format, opens in Fusion 360, SolidWorks, FreeCAD, and most other CAD software
F3D -native Fusion 360 archive, includes the full parametric timeline and all parameters described below
How to edit the parameters
Open the F3D file in Fusion 360
Go to Modify → Change Parameters
Look at the Favorites section at the top — these are the only values you need to touch
Change a value, hit Enter, and the whole model updates automatically
You do not need to touch anything outside the Favorites list. Everything else updates automatically behind the scenes.
Adjustable parameters (Favorites)
Parameter | What it controls |
|---|---|
| Outer height of the hoop |
| Outer width of the hoop |
| Gap between the two rings, sized for your fabric's thickness |
Everything else in the parameter list (prefixed DoNotEdit_) is internal, these are calculated automatically from the values above and don't need to be touched.
License
Released under CC BY / CC BY-NC-SA - feel free to remix, adapt, and reuse for your own builds. Attribution appreciated!
About
Made by Konstkaos - Amateur by trade, meticulous by habit.
If you print or remix this, I'd love to see it!