3M Marine 5200 4200 4000 10oz Berkland Threaded Sealant Tube Tip Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Marine sealant threaded cap and tube tip works with 3m 4000, 4200, 5200 and many other sealants
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
Marine sealants are expensive and dont come with caps because they consider them as a one time use. Save your sealants.
Other caulking cap models won't work as the threads are too coarse.
Its imperative to follow instructions precisely to preserve your sealant
Run the cap through the threads to "clean/ break in" use adjustable wrench to tighten all the way
Wipe tube opening level of excess sealant and have clean threads. Threads can be cleaned with acetone.
Cut out "heavy duty aluminum foil" (18-24 microns) and much more tear-resistant than normal household foil (10–15 microns). Fold in half for added thickness (prevent rips when threading)
Tape the back of the tube up to prevent silica beads going inside and sticking.
Press and firmly push in aluminum foil flat along the threads
Screw in cap over the foil
Place into air tight zip blog or container
Insert silica beads inside container(sucks out moisture)
Roll the bag with tube to take all air out
Store in cool dry area(refrigerator is a plus)
I use the the tube tips as one time disposable to keep threads clean. Tips have cut ring guides for different size beads.
Tube tip print settings:
Print with 1 wall loop and 0% infill for easier tip cutting. Avoid using as a storage cap with these settings as it may be more permeable to moisture
.12 Layers Wall loops 3
Top shell layers 6
Bottom shell layers 4
Infill 100
Outer brim 5mm
No support
Cap settings:
.12 layers
No support
100 infill
Printed in pla
