1 / 9
3M Marine 5200 4200 4000 10oz Berkland Threaded Sealant Tube Tip Cap — image 1
1 / 9

3M Marine 5200 4200 4000 10oz Berkland Threaded Sealant Tube Tip Cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Marine sealant threaded cap and tube tip works with 3m 4000, 4200, 5200 and many other sealants

Rating
0 / 5
Likes
0
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Standard Digital File License

Marine sealants are expensive and dont come with caps because they consider them as a one time use. Save your sealants.

Other caulking cap models won't work as the threads are too coarse.

Its imperative to follow instructions precisely to preserve your sealant

  1. Run the cap through the threads to "clean/ break in" use adjustable wrench to tighten all the way

  2. Wipe tube opening level of excess sealant and have clean threads. Threads can be cleaned with acetone. 

  3. Cut out "heavy duty aluminum foil" (18-24 microns) and much more tear-resistant than normal household foil (10–15 microns). Fold in half for added thickness (prevent rips when threading)

  4. Tape the back of the tube up to prevent silica beads going inside and sticking. 

  5. Press and firmly push in aluminum foil flat along the threads

  6. Screw in cap over the foil

  7. Place into air tight zip blog or container

  8. Insert silica beads inside container(sucks out moisture)

  9. Roll the bag with tube to take all air out

  10. Store in cool dry area(refrigerator is a plus)

I use the the tube tips as one time disposable to keep threads clean. Tips have cut ring guides for different size beads. 

Tube tip print settings:

Print with 1 wall loop and 0% infill for easier tip cutting. Avoid using as a storage cap with these settings as it may be more permeable to moisture 

.12 Layers Wall loops 3
Top shell layers 6
Bottom shell layers 4
Infill 100
Outer brim 5mm
No support

Cap settings: 

.12 layers
No support

100 infill

Printed in pla

Tags